CN
Contact Email:

sunxy@ashurweather.com

Laser Aemote Sensing Road Condition Detector (RD3000-A Type)

Laser Aemote Sensing Road Condition Detector (RD3000-A Type)

Category : Ice and Snow Road Detection

Release Date : 2024-03-26 06:35:47

Hotline : 18211985279 Leave a message online
Details

1. Product Appearance of Laser Remote Sensing Road Condition Detector (RD3000-A Type)

Laser remote sensing road condition detector


2. Product Overview of Laser Remote Sensing Road Condition Detector (RD3000-A Type)

Laser remote sensing road condition detector uses infrared laser remote sensing technology for non-contact detection, which does not require cutting the road surface and avoids damage to the road. Based on the infrared spectral characteristics of water, ice, and snow, the laser remote sensing road condition detector can give the true state of the road in real time, measure the coverage type and thickness of water, ice, and snow. It also has an infrared remote sensing road temperature function that can monitor Road temperature, providing high temperature warning.

3. Laser Remote Sensing Road Condition Detector (RD3000-A Type) Functions and Characteristics

1) Real-time, online, and continuous monitoring of the condition of the road surface, as well as the thickness of water, snow, and ice;

2) Detect road surface conditions: dry, wet, water, frost, ice, snow, ice-water mixture, etc.;

3) Non-embedded installation, fast and easy, low maintenance cost; no need to cut the road surface, non-destructive installation on the bridge deck; built-in laser pointer to facilitate on-site determination of specific monitoring areas (driving lanes or overtaking lanes);

4) The installation does not require road closure, the installation work is safe and convenient, and will not affect the traffic flow of the road section; existing monitoring poles, gantry, telegraph poles, street light poles, observation towers, etc. can be used to shorten the installation cycle;

5) The actual measurement area is larger than the contact type, which can provide more real and accurate data.

4. Application Fields of Laser Remote Sensing Road Condition Detector (RD3000-A Type)

1) Bridge deck (viaducts, overpasses, bridges across lakes, etc.)

2) Accident-prone road sections caused by slippery ice and snow

3) Areas with heavy traffic or frequent accidents

4) Highway maintenance de-icing (melting) system

5. Typical Technical Indicators of Laser Remote Sensing Road Condition Detector (RD3000-A Type)

Detection Distance

2-18 m

Detection Diameter

Greater than 25 cm

Angle

30-90 degrees

Measurement Principle

Infrared multispectral optics; 4 laser wavelengths

Power Input

+12VDC (allowed input range: +11V—+24V)

Power Consumption

Average 4W, non-heating state: ≤3W heating on state: ≤6W

Operating Temperature

-40~+60℃

Working Humidity

0~100%RH

Road Condition

Dry, moist, waterlogged, frost, ice, snow, ice-water mixture, etc.

Measure Thickness

Water: 0-10mm

Ice: 0-10mm

Snow: 0-10mm

Resolution: 0.01mm

Slippery Degree

Range: 0-1; equal to the road friction coefficient evaluation

0.82-0.7

0.7-0.6

0.6-0.3

0.3-0.01

Good

Slippery

Very slippery

Extremely Slippery

Road Temperature

Range: -40~+80℃; Accuracy: ±0.5℃, Resolution: 0.1℃

Communication Interface

RS485 (supports multi-machine communication), RS232
Baud rate range: 9600bps (1200-19200bps can be set)

Lens Contamination Detection

Pollution level measurement of optical lenses and internal automatic pollution compensation

Pavement

Concrete, asphalt pavement

Protection Level

IP65

Safety

No safety issues – infrared remote sensing measurement technology

Home Telephone top